Cost of Automatic Gates in Brisbane | Sliding & Solar Options | Free Quotes - Accolade Fencing, Deception Bay

Cost of Automatic Gates in Brisbane: What Drives the Price

Quick answer: There is no single price for an automatic gate in Brisbane, because every gate is made for its opening. The cost is made up of three parts: the gate, the motor kit, and installation. It moves most with the width of the opening, the material and style, the colour, and how far the gate is from power. We quote each gate from your measurements, so the fastest way to a real number is to send us the size of the opening.

If you are pricing an automatic gate for a driveway in Brisbane or Moreton Bay, the numbers online are hard to compare. Some are for the gate only, some include the motor, some include fitting it, and most do not say which. This guide breaks the cost into its parts, so you know what you are being quoted for and what will push the price up or down.

One thing to know up front: we are a manufacturer and supplier. We make the gate to your measurements at our Deception Bay workshop and supply the motor kit to suit it. We do not install, so what we quote is the supply price, and your installer quotes the fitting.

Why There Is No Set Price

We do not have a price list for gates, and that is deliberate. Two driveways in the same street can need very different gates: one a narrow single opening between brick pillars, the other a wide double driveway on a slope. The size, the gap, the style and the colour all change what goes into the gate, so the price is worked out job by job.

That also means a quote is quick once we have the basics. The four things we need are listed further down.

What You Are Actually Paying For

PartWhat it isWho quotes it
The gateFrame and infill, made to the width and height of your opening, powder coatedUs
Track and hardwareGround track, wheels and guides for a sliding gate; hinges and latch for a swing gateUs, with the gate
The motor kitThe motor and the automation kit that goes with it, plug-in or solarUs, sized to the gate
InstallationPosts or footings, fitting the gate, wiring the motorYour installer

When you compare quotes, check which of these four each one covers. A low figure that leaves out the motor or the fitting is not a cheaper gate.

What Moves the Price of the Gate

Width. This is the big one. A double driveway gate uses close to twice the material of a single, and a longer sliding gate needs a heavier frame to stay straight.

Material and style. Aluminium slat and batten gates, spear top gates and steel-framed gates all price differently. A welded custom design costs more than a simple pattern, but it is how you get a gate that matches a fence you already have.

Height and infill. A tall privacy gate with no gaps carries more material, and more wind load, than a low open picket gate. Wind load matters for the motor as well as the frame.

Colour. If you are matching an existing fence, bring a photo or an offcut and we will match the colour before you order.

Sliding or Swing: Which Costs More?

A swing gate is the simpler mechanism and is usually the cheaper of the two. A sliding gate needs a track, wheels and a frame long enough to overlap the opening. It is still the most common choice on Brisbane driveways, for practical reasons:

  • Sloping driveways. A swing gate can jam against the rise before it is fully open. A sliding gate runs across the slope instead.
  • Short driveways. If you park close to the gate, keeping a swing arc clear gets old fast.
  • No room to swing. A sliding gate only needs space beside the opening to run back into.

A swing gate makes sense where the ground is level and there is room for the arc. We cover the choice in more detail in our sliding gate vs swing gate guide.

Plug-In or Solar Motor?

Plug-in motors suit most suburban homes. They give strong, consistent power, which matters for heavier gates and for households that open the gate many times a day. The catch is the power supply. If there is no outlet near the gate, power has to be run to it, and on a long driveway that can be a real part of the total cost.

Solar motors suit acreage, long driveways and anywhere running mains power is the real cost. There is no trenching for power. They depend on the panel getting sun, and they are not the right pick for a very heavy gate.

Either way, the motor should be sized to the actual gate: its weight, its length and how often it will run. We size motors to the gate we are making rather than selling one kit for everything. You can read more on our gate automation page.

Adding a Gate to a Fence You Already Have

You do not have to replace the fence to add a gate. Because we fabricate in our own workshop, a gate can be made to the exact width of an existing gap and powder coated to match the panels beside it. We have written up two recent examples in custom gates made to match an existing fence.

If you are building a new fence, it is worth ordering the gate at the same time, so the two are made and finished to match from the start.

How to Get an Accurate Price

A real quote needs four things:

  1. The width of the opening, post to post
  2. The height you want
  3. Whether the ground is level or sloping across the opening
  4. How far the gate is from the nearest power point

Send those through our quote form, with a photo of the driveway if you can, and we will price the gate and the right motor for it. If you need someone to fit it, we can point you to local installers who work with our gates regularly.

Frequently Asked Questions

How much does an automatic gate cost in Brisbane?

There is no set price. Every gate is made to its opening, so the cost depends on the width, the height, the material and style, the colour and the motor. Send us the size of your opening and we will quote the gate and motor for it.

What is included in the price of an automatic gate?

Our quote covers what we supply: the gate, its track or hinges and hardware, and the motor kit sized to suit. Installation is quoted separately by your installer.

Is a solar gate motor a better choice than a plug-in one?

It depends on the site. A plug-in motor suits most suburban homes with power near the gate. A solar motor suits long driveways and acreage, where running mains power to the gate would be the bigger cost.

Do you install automatic gates?

No. We manufacture the gate and supply the motor kit. We can refer you to local installers who work with our products regularly.

Do you repair or service gate motors?

No. We supply new motors only. For gates and panels, our workshop can weld, repair and re-powder coat items you bring in.

What do you need from me to quote a gate?

The width of the opening, the height you want, whether the ground is level or sloping, and how far the gate is from power. A photo of the driveway helps.

Planning a gate? Send us the opening width, the height and a photo through our quote form and we will price it for you.